/EllipsoidH
From fCraft Wiki
| Command | |
| EllipsoidH
Fills an elliptical area with a shell of blocks. | |
|---|---|
| Aliases | /EH |
| Usage | /EllipsoidH
/EllipsoidH BlockType |
| Category | Building |
| Required permissions | Draw |
| Usable from console? | No |
| Introduced in | fCraft 0.506 |
Surrounds an elliptical area with a shell of blocks, leaving the inside untouched. After entering the command you need to mark 2 opposing corners of the area. You can do that either by clicking the blocks (building or deleting works), or using the /Mark command. The ellipsoid will then automatically shape and fit itself within the specified area, and cut out the inside of it. The results of /Ellipsoid can be undone using /Undo.
Contents |
[edit] /EllipsoidH
- Fills the area with the block that you are currently holding.
[edit] /EllipsoidH BlockType
- Fills the area with a given block type.
[edit] Drawing the hollow ellipsoid
 The marked area. |
 The completed shell. |
 The completed shell with half cut away. |
[edit] Customizing /EllipsoidHollow behavior
- The volume of blocks that can be drawn at once can be limited per-rank. See "Draw limit" field on ConfigTool's Ranks tab. Alternatively, set the "drawLimit" attribute on the <Rank> tag (if you are editing config.xml manually).
- Being able to undo a command requires storing a backup an area of the map. This may take up significant amounts of memory. By default, fCraft limits /Undo to the first 2,000,000 blocks that are drawn. You can change this (or remove the limit entirely) via MaxUndo config key.
